Note: Sliders are very quick metal slabs that are activated by standing in or passing through the sensor beam they’re attached to. They are usually used as platforms for standing on and as such many puzzles will involve you sliding them into set positions.
Hop into the slider sensor, jump over the slider and then your third and final jump should take you up to the switch, whilst leaving the slider on the left-side of the room. Hit the switch, drop down, activate the panel then very quickly drop down into the right-side of the sensor beam and immediately jump back up so as to land on top of the slider.
This next slider moves vertically and as such you need to lower it by very briefly nipping in and out of the sensor beam (oh, and if you want the hidden [Helix] on this level, now’s the time to grab it).
Now just as quickly jump up into the sensor on top of the slider and immediately jump up and to the right to land on the platform. Leap across to the switch; activate it and then drop down to the sensor beam below hopping over the slider twice and then leaping up at the end to land on top of it.
Wait for the walking robot to face left and then perform a small hop upwards so only the tip of your head touches the left side of the slider (below the C1 sign). This will bring the slider to the robot, so nip right and once the robot is on top of the slider, hop up again so the tip of your head brings the slider to the right. You can then hop up one final time once the robot is on the switch to keep it there in one place.
Jump up to the terminal via the left-side, hack it then drop down the right-hand tunnel, climb through the gap on your left (opposite the camera) and finally drop down in-between the two sliders to draw them over the camera’s vision cone. Hack the panel and then make your escape.